Xpres Cut Plus: Ultragraphics Roland GX-24 Manual - Manual (Page 11)

The Xpres Cut
®
Plus process continued
11
Step 6
the cut lines now need to be grouped
together. click on Window > Dockers >
object Manager. You will see the
cut lines appear under the ‘Page 1’
section. click on the top cut line, hold
the shift key down and click on the
bottom cut line. You will now see them
all highlighted in blue on the object
manager. While they are highlighted
click on the Group button or go to
Arrange and choose Group. It would
now be a good time to save the design.
Step 7
While the cut lines are still highlighted,
press the delete button on your
keyboard. the cut lines will now
disappear. this process ensures the cut
lines are not printed on the design. click
Print and select your printer. Print the
design out centrally on the paper.
Step 8
once the image has printed click the
Undo button or go to edit > Undo to
bring back the cut lines. Hold down the
shift key and click on one of the three
black crop marks, then release the shift
key. this will now select the cut lines and
the crop marks only. now click the Print
icon or go to File > Print.