Xpres Cut Plus: Ultragraphics Roland GX-24 Manual - Manual (Page 9)

9
The Xpres Cut
®
Plus process
over the next few pages you will learn how to place your images into corelDRAW, print them, then cut them out on the
Roland GX-24 cutter.
You will need to use the templates that were provided during your installation or on your technical cD, they should be saved
to your Pc in a folder called Xpres on your desktop. to use the templates open corelDRAW and click File > open, and
browse to the above location to open this template
Step 1
open the Xpres cut Plus template
and delete the reminder.
Step 2
click on File > Import, and Import an
image (off the template area as shown
in diagram).
tip: If the image is a multi-layered
Vector image it would be a good idea
to group the image together before
proceeding to the next stage.