B&C Technologies DP-250 Industrial - Manual (Page 41)

Service & Parts
A. SERVICE
Service must be performed by a qualified
trained technician, service agency, or gas
supplier. If service is required, contact the
distributor from whom the equipment was
purchased. If the distributor cannot be
contacted or is unknown, contact B&C
Technologies for a distributor in your area..
For technical assistance in the United States,
contact B&C Technologies:
(850) 249-2222 Phone
(850) 249-2226 FAX
[email protected]
www.bandctech.com
NOTE: When contacting B&C Technologies
be sure to supply the correct model number
and serial number so that your inquiry is
handled in an expeditious manner.
B. PARTS
Replacement parts should be purchased
from the distributor from whom the
equipment was purchased. If the distributor
cannot be contacted or is unknown, contact
B&C Technologies for a distributor in your
area. Parts may also be purchased directly
from the factory
NOTE: When ordering replacement parts
from a dealer or B&C Technologies, be sure
to supply the correct model number and
serial number so that your parts order can
be processed in an expeditious manner.