Nextteq Standard Airtec Regulator Kit - Manual (Page 17)

PACKING LIST SECTION II: Airtec Kit Components
17 NEXTTEQ LLC (Rev. 2) 4/09
_______________________________________________________________________
2.3 TUBE HOLDER
The tube holder is designed to hold a Gastec detector tube leak-tight in series with the
regulator flow meter.
Important
Use only Gastec Airtec tubes. Other Gastec tubes are NOT calibrated for use with this
type of sample delivery. See Section 1.3 (page 12) for further information.
FIGURE 4
READING THE FLOWMETER
TABLE 4
FLOWMETER SPECIFICATIONS
Item Specifications
Range 100-500 scc/min
Delivery Pressure 50 psi (preset)
Backpressure Compensation Yes
Metering Value Integral with flow meter