Pilz PNOZ s30 24-240VACDC 2 n/o 2 n/c User Manual
Pilz Sensors
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Operating Manual PNOZ s30
- Preface
- Contents
- 1 Introduction
- 2 Overview
- 3 Safety
- 4 Function description
- 5 Installation
- 6 Commissioning
- 6.1 Wiring
- 6.1.1 General wiring guidelines
- 6.1.2 Pin assignment of RJ45 socket
- 6.1.3 Supply voltage
- 6.1.4 Connection of proximity switches
- 6.1.5 Connection of a rotary encoder
- 6.1.6 Connection of proximity switch and rotary encoder
- 6.1.7 Reset circuit
- 6.1.8 Feedback circuit
- 6.1.9 Select inputs
- 6.1.10 Semiconductor outputs
- 6.1.11 EMC-compliant wiring
- 6.2 Display menu - Configuration
- 6.1 Wiring
- 7 Operation
- 8 Technical details
- 9 Supplementary data
- 9.1 Service life graph of output relays
- 9.2 Categories
- 9.2.1 Safety level
- 9.2.2 Safety functions
- 9.2.3 Safety-related characteristic data for operation with non-safety-related rotary encoder without additional requirements
- 9.2.4 Safety-related characteristic data for operation with non-safety-related rotary encoder with mechanical fault exclusion
- 9.2.5 Safety-related characteristic data for operation with non-safety-related rotary encoder with diagnostics via the drive controller
- 9.2.6 Safety-related characteristic data for operation with a safe rotary encoder
- 9.2.7 Safety-related characteristic data for operation with a safe rotary encoder with Z index
- 9.2.8 Safety-related characteristic data for operation with non-safety-related rotary encoder and proximity switch
- 9.2.9 Safety-related characteristic data for operation with 2 proximity switches
- 9.3 Examples
- 10 Order reference
- Contact address