Canon DR-7080C - Manual (Page 22)

18
Chapter 1 Getting Ready
Rear
!22 Air Vents
!3 USB Connector
Connect a Hi-Speed USB 2.0 compatible USB cable here. (See p. 28.)
!4 DIP Switches
Configure these switches to specify the SCSI ID or terminator ON or OFF.
(See p. 26.)
!5 SCSI Connectors
Connect a SCSI cable (50-pin half pitch, pin type) here. (See p. 25.)
!6 Power Cord Connector
Connect the provided power cord here.
● Never touch the cables on the left side of the back panel. Disconnection of cables
can cause a malfunction of the scanner.
● Take care to ensure that the vents never become blocked. Blocked vents can lead to
heat build-up inside the scanner and create the risk of fire.
Important