Canon DR-7080C - Manual (Page 25)

21
1
Optional Products
The following options can be purchased and used on the DR-7080C, if they are
necessary. Contact your sales representative.
Stamp Unit
The stamp unit affixes a “scanned” stamp on document pages that are scanned
using the feeder. The application can be used to turn stamping on or off.
The stamp is a circle that has a diameter of about 0.11" (3 mm), with a cross in
the center. It is stamped on the scanned side of the document page, about
0.27" (7 mm) from the trailing edge of the document page.
Stamp
Position
Stamp
Position
● The stamp pattern is fixed and cannot be changed.
● In the case of duplex scanning, both sides of the document page are stamped.
● The cross in the center of the stamp rotates during stamping.
Note
1.5 Optional Products