Canon DR-7080C - Manual (Page 57)

53
4
4
Raise the feeder and remove the document from the flatbed (platen
glass).
● Raise the feeder carefully and slowly, taking care to avoid letting the feeder fall over
backwards.
● Leave the feeder raised when scanning thick documents like books, or operate the
feeder as shown in the procedure below.
1. Raise the feeder.
2. While pressing on the bottom of the feeder q, pull the feeder down and forward w.
3. Set the thick document or book on the flatbed (platen glass) and hold the feeder
lightly while scanning.
1.96" (50 mm)
Book or Thick Document
4. To return the feeder to its original position, raise it all the way q, then close it
carefully and slowly. w
Important
4.2 Placing Documents onto the Scanner