FaxBack NET SatisFAXtion 8.6 - Installation Guide - Manual (Page 6)

NET SatisFAXtion 8.6 Installation Guide — Page 6
Eicon Diva Server
Your Eicon Diva Server hardware will have come with a driver CD. Please have it ready prior to installing your Eicon hardware,
or download the latest drivers from http://www.eicon.com/.
Power off your server and install the Eicon Diva Server card.
Power the server on. The Windows Found New Hardware wizard will start. This cannot be used to install the driver. Click
Cancel.
Locate and run the Setup.exe on the Eicon Diva Server CD or in the folder where the downloaded drivers were extracted. A
simple wizard will open that will install the required files.
Do not check the “Run customized installation wizard” checkbox. You will want a default driver install.
Click Next and then Finish. The installer will reboot the server.
After the server has rebooted, run the Diva Server Configuration Manager.
Configure the card and line as appropriate. Configure a fax modem pool as the top-most device. The number of modems should
be equal to the number of T1 or PRI channels. Save, then activate the configuration. The Diva Server Configuration Manager will
create the requested number of modem devices, then reboot the server.
You are now ready to install NET SatisFAXtion. Proceed to “2. Installing NET SatisFAXtion.”