Sangean U3 (V1) - Manual (Page 16)

5
Software version
The software display cannot be altered and is just for your reference.
. Turn off the radio.
2. Press the Band/step button for 2 seconds until the software
version number (e.g. P01) shown on the display.
Time format
3. Continue pressing the Band/step button until ’24H’ or ’2H’ shown
on the display followed by a beep.
4. Rotate the Tuning Control knob to choose the desired selection
and press the knob to confirm the setting.
Setting tuning step
5. After the time format setting is completed, the display will switch
to tuning step setting. Rotate the Tuning Control knob to choose
the desired FM tuning step (50 kHz or 100 kHz) and press the
knob to confirm the setting.
6. After the confirmation of FM tuning step, rotate the Tuning Control
knob to choose the desired AM tuning step (9kHz or 10kHz) and
press the knob to confirm the setting.