3 practice best glide speed, Establish segments illuminated, Practice best glide speed -11 – BendixKing KLR 10 User Manual

Page 29: Establish segments illuminated -11

Advertising
background image

KLR 10 Lift Reserve Indicator Pilot’s Guide

P/N D201306000109

Operation

Rev 1 Feb 2014

Page 3-11

3.3 PRACTICE BEST GLIDE SPEED

As mentioned earlier, the AOA may be used for identifying aircraft

performance based on a fixed AOA or a constant C

L

. For this

discussion C

L

/C

D

Maximum indication will be identified. This is the

maximum lift-to-drag ratio at which maximum range and maximum

glide distance will be found for propeller airplanes.
To find the AOA for best glide, calculate an indicated airspeed

considering:
•

Actual gross weight.

•

Pressure altitude, at the demonstration altitude.

•

Temperature, at the demonstration altitude.

•

Correct CAS for installation errors to arrive at IAS.

Establish Segments Illuminated

As before, to familiarize you with the KLR 10 AOA indications for

C

L

/C

D

Maximum, use the following outline as a guide:

•

Plan a flight to an area where the desired maneuvers may be

performed without any undue hazards.

•

Acquaint yourself with the KLR 10 display AOA indicator.

•

Preflight and operate the aircraft as you would normally.

•

When in the area, perform clearing turns to ensure the area is

clear.

•

Maintain coordination.

•

Maintain altitude.

•

Use power to slow and maintain best glide speed.

•

Observe the KLR 10 display AOA indication; this is C

L

/C

D

Maximum.

•

Return to normal flight.

•

Using the abbreviations from Table 2-2 on page 2-4, write down

the illuminated segments in the space provided below and in the

Table 3-1: Observed Indications Chart on page 3-17.

Advertising