BendixKing KLR 10 - Manual (Page 9)

KLR 10 Lift Reserve Indicator Pilot’s Guide
P/N D201306000109 KLR 10 Controls
Rev 1 Feb 2014 Page 2-1
2. KLR 10 CONTROLS
2.1 POWER UP SELF TEST
When power is first applied to the KLR 10 (only after ground, OAA
and Cruise are fully calibrated per the Installation Manual), the
KLR 10 runs through a built in test. During the test, the segments
cycle up and then down the display. When the test is complete, the
segments turn off and the KLR 10 annunciates “AOA test complete”.
2.2 KLR 10 INDICATOR MAIN CONTROLS
Figure 2-1: KLR-10 Indicator Controls
Use the table below for a description of the functionality of the
controls in Figure 2-1