CANOGA PERKINS 9101 LAN Chassis - Manual (Page 9)

9
9101 LAN Chassis Canoga Perkins
Chapter 2 - Chassis Installation
2.1 9101-0 LAN Chassis
The Model 9101-0 LAN Chassis is non-powered and designed to support the 8814
Fiber Optic Transceivers and the WA-2, 2-Port passive WDM module. The
transceivers receive their power from the attached DTE device via the AUI cable.
Therefore, the setup and installation of the LAN chassis is very straight forward.
Ensure you have the necessary equipment available for the setup requirements.
Setup Requirements:
1.
Suitable, well-ventilated location
2. 19-inch Relay Rack
3. Canoga Perkins-supplied equipment
Setup Procedure:
Insert the 9101-0 LAN Chassis (see Figure 2-1) into the chosen location
of the relay rack and secure with screws.
Figure 2-1
9101-0 LAN Chassis