CANOGA PERKINS 9151 Network Interface Device - Manual (Page 51)

Index
A I
add input/output options, 1-1
trap destination, 3-14 install hardware, 2-1
user account, 3-12 IP address
Host Access Table, 3-7
C
latency/jitter test, 4-4
change password, 3-13
PING, 4-5
Connected Sessions screen, 3-13
SLIP, 3-8
create
SNTP server, 3-7
trap destination, 3-14
system, 3-7
user account, 3-12
trap destination, 3-14
D
L
date and time, 3-6
LAG [name] Definition screen, 3-23
delete
LAG [name] Status and Systistics screen, 3-23
trap destination, 3-15
LAG Configuration screen, 3-19, 3-23
user account, 3-13, 3-20
Latency/Jitter Test screen, 4-4
Description Report screen, 3-6
LEDs and functions, 2-2, 2-3
Double Tagging Configuration screen, 3-21
link loss forwarding function, 2-5, 3-9
Dynamic ARP Table screen, 3-24
logged in users, 3-13
E
Login screen, 3-5
edit
M
trap destination, 3-14
Management Packet Control screen, 3-9
user account, 3-12
MIBs, 3-1
F
MST Instance Configuration screen, 3-22
Fdb Log screen, 3-24
O
firmware download, 3-10
optical power check, 4-1
forwarding database, 3-24
optical/UTP options, 1-1
G
P
general screen navigation and format, 3-2
password, change, 3-13
Global Spanning Tree Parameters screen, 3-18
PC setup, 3-2
Global Spanning Tree Report screen, 3-22
PING Generation screen, 4-5
H
Port Information screen, 3-18
hardware installation, 2-1
R
Host Access Table screen, 3-7
remote fault function, 2-4, 3-9
required MIBs, 3-1
9151 Network Interface Device I-1