CANOGA PERKINS 9151 Network Interface Device - Manual (Page 43)

Test a Connection With PING
When you set up a new connection or need to troubleshoot an existing connection to another device,
you can send a PING to the specific IP address for that device. Use the PING Generation screen to
test the connection. To set up and send a PING, follow these steps:
1. From the Diagnostics menu, type 2 , "PING Generation," and press <Enter>.
2. At the PING menu prompt, set the PING parameters, and press <Enter>.
" PING response received... " indicates a good connection;
" TIMEOUT: Unable to reach [IP address]... " indicates a faulty connection.
3. To stop the PING, press <Esc>.
9151 Network Interface Device 4-5