CANOGA PERKINS 9151 Network Interface Device - Manual (Page 38)

To access these screens, follow these steps:
1. From the Switch Configuration menu, type 4 , "Lag Configuration," and press <Enter>.
2. At the Lag Configuration screen, type the number for an item and press <Enter>, then type the
LAG name or press <Space> to cycle through the LAG names, and press <Enter>.
• To access the LAG [name] Definition screen, type
2 , "View/Change LAG," and press
<Enter>, then type the LAG name or press <Space> to cycle through the LAG names, and
press <Enter>.
• To access the LAG [name] Status and Statistics screen, type
3 , "View LAG Stats," and press
<Enter>, then type the LAG name or press <Space> to cycle through the LAG names, and
press <Enter>.
3. To return to the Switch Configuration menu, press <Esc>.
Check the Forwarding Database
To view the listings of VLAN ID, MAC address, port name, and status in the Forwarding database
(Fdb log), follow these steps:
1. From the Main menu, type 4 , "Reports," and press <Enter>.
2. From the Reports menu, type 4 5 , "Fdb Log," and press <Enter>. View the listings of VLAN ID,
MAC address, port name, and status.
3. To return to the Main Menu, press <Esc>.
Check the Static and Dynamic ARP Tables
The Static ARP table lets you set or change specific IP and MAC addresses for up to 10 ports. The
Dynamic ARP table lists currently-assigned IP and MAC addresses for various 9151 ports.
To view, set, or remove a static ARP address, follow these steps:
1. From the IP Settings screen, type 8 , "Static ARP Table," and press <Enter>.
2. At the prompt, type a number to edit a port, and then follow the prompts.
3. To return to the IP Settings screen, press <Esc>.
To view the current addresses on the dynamic ARP table, follow these steps:
1. From the Main menu, type 4 , "Reports," and press <Enter>.
2. From the IP Settings screen, type 6 , "Dynamic ARP Table," and press <Enter>.
3. To return to the Main Menu, press <Esc>.
9151 Network Interface Device 3-24