CANOGA PERKINS N525 Ethernet Termination Service Unit User Manual
Page 46
3-28
N525 Ethernet Termination Service Unit
1. Access the SNMP Configuration Menu before starting the software upgrade: enter the IP
Address, Subnet Mask, and Default Gateway for the N525.
2. From the Main Menu, type [
7
], "Software Upgrade," and press <Enter>.
3. At the Software Upgrade Menu, type [
3
], Get New File with TFTP, and press <Enter>.
4. At the prompts, type the IP address for the TFTP, FTP, or SFTP server and the
Filename.
------------------------------------SOFTWARE UPGRADE----------------------------
Time Since Last Restart 2 days 13:53:23
Local Remote Offline
Last Data
Active Firmware 96.05
Inactive Firmware 12.15
Bootcode 06.30
1) Software Reset Reset Reset
2) Swap Bank & Reset Swap Swap
3) Get New File with TFTP
Select [1-3]:
------------------------------------Messages------------------------------------
-------------------------------MANAGEMENT IP CONFIGURATION----------------------
Local Remote L357
MAC Address 00 40 2A 00 87 3A
Management Port UP
1) Manager IP Address 172.016.142.225
Subnet Mask 255.255.000.000
Default Gateway 172.016.001.001
2) Test IP Address 000.000.000.000
Test Subnet Mask 255.255.255.000
3) Inband Management Port Both Ports
4) Management VLAN Tagging Disabled
5) Management VLAN Number 1
6) SLIP/PPP IP Address 000.000.000.000
7) Serial Port Config VT100
8) Telnet Security Disabled
Select [1-8]:
------------------------------------Messages------------------------------------