CANOGA PERKINS N525 Ethernet Termination Service Unit - Manual (Page 52)

3-34 N525 Ethernet Termination Service Unit
If UI Password Expire is set to Yes; this configures how long the Password is
valid. Duration setting from 0 (never) to 365 days. A setting of 0 is equal to UI
Password Expire is set to No
g. Allow UI Lockout of User – Yes/No
Sets if the User can be blocked from the system after excessive failed attempts
to log in.
h. Allow UI Logout of User
Sets if user gets automatically logged off upon excessive inactivity
i. UI Logout Locked State
Displays current user state: Locked, Unlocked, Logged Out, or Logged In
j. SNMPv3 Authentication Protocol
Sets SNMPv3 authentication protocol: MD5, SHA, or None
k. SNMPv3 Authentication Password
Password that generates the MD5 or SHA authentication key: 8 to 15 characters
SNMPv3 Authentication Key
Displays the MD5 or SHA Authentication Protocol Key that authenticates the
user. the Key is generated automatically by the Authentication Password, but can
be changed if the user's host uses a different Authentication Key generation
algorithm. the Key is 16 Hex characters for MD5 protocol or 20 Hex characters
for SHA protocol.
l. SNMPv3 Privacy Protocol
Selects encryption protocol: DES or None
m. SNMPv3 Privacy Password
Password that generates the DES Privacy Protocol Encryption Key: 8 to 15
characters
SNMPv3 Privacy Key
Displays the DES Privacy Protocol Key and is generated automatically from the
Privacy Password. It can be changed if the user's host uses a different Privacy
Key generation algorithm: 16 Hex characters
4. To delete a user, type [ d ], then follow the prompts to select the username and confirm
the choice. When completed, the User Accounts Menu reappears.
5. To return to the Main Menu, press <Esc>.