Leica Geosystems Laser Locator - Manual (Page 16)

16
Laser Locator-1.0 en
Horizontal and vertical distance between two objects
i
Distance measurements
Click the distance key once,
then immediately press and hold
it down.
The pointing circle appears. Sight the first object with the
pointing circle.
Click the azimuth key while
holding the Laser Locator
steady.
The first object measurement is
confirmed (1-P = first point). Sight the second object with the
pointing circle.
Release the distance key while
holding the Laser Locator steady.
The horizontal distance appears
at the left and the vertical
distance at the right of the field
of view.
Setting measurement units:
see page 26.