Leica Geosystems Laser Locator - Manual (Page 35)

35 Laser Locator-1.0 en
Troubleshooting (continued)
Troubleshooting
Problem Possible cause Solution
Multiple object measurement is
activated: ”3dIS on”.
The Laser Locator only displays
the distance to the most
reflective object in the line of
vision.
The permissible angle of
inclination of
±45° has been
exceeded:
tilted too far upwards
tilted too far downwards
tilted too far to the right
tilted too far to the left
Distance display blinks.
The Laser Locator measures
objects in front or behind the
intended object (e.g. bushes ->
object -> mountain).
These symbols are displayed
during azimuth measurement:
Click the distance key to display
distances in succession (see
page 12).
Activate multiple object
measurement: ”3dIS on” (see
page 25).
Do not over-tilt or bank the
Laser Locator.