Leica Geosystems Laser Locator - Manual (Page 34)

34 Laser Locator-1.0 en Troubleshooting
Troubleshooting (continued)
"- - - -" appears in the display
when distance is measured. The distance is outside the
specified measuring range.
Inadequate reflectance:
• object too small or inaccurately
targeted;
• The Laser Locator was shaken
during measurement;
• Bad weather conditions (haze,
fog, turbulence).
See the specified measuring
range on page 41.
See the list of factors affecting
measuring range on page 10.
Problem Possible cause Solution