Leica Geosystems Laser Locator - Manual (Page 40)

40 Laser Locator-1.0 en
Care / cleaning
Care / cleaning
The Laser Locator’s
performance and serviceability
are conditional on regular care
and immediate attention to
problems:
• Do not touch glass lenses with
fingers.
• Do not soil the operating keys
with oil or grease.
• Avoid abrupt temperature
transitions, since these can
cause condensation moisture
to develop inside the Laser
Locator.
The Laser Locator does not
need special care or cleansers.
Therefore
- do not use any kind of
impregnated cloth intended for
cleaning spectacle lenses,
- do not use any solvent except
water, e.g. no alcohol or
cleansers.
Lens cleaning
Particles of dirt should be blown
off or removed using a soft brush.
Finger prints may be cleaned
first by wiping with a damp cloth,
followed by soft, clean optical
tissue or chamois leather.
Cleaning the casing
Wipe the casing with a damp
cloth.
Pay special attention to dirt and
grease around the keys.
Blow out the Laser Locator
interface cable socket, and
clean it carefully.
Allow the Laser Locator to dry
fully before packing.
Cleaning the interface cable
Protect the cable from damp
and dirt as much as possible!
Wipe the cable with a damp
cloth. Blow out soiled cable
plugs with clean air, and leave
them to dry.