Leica Geosystems Leica mojoMINI 2 - User Manual - Manual (Page 18)

18 Leica mojoMINI 2, System Installation
4. Plug the rectangular connector of the mojoMINI 2 cable into the socket of the
mounting cradle.
ƽ
CAUTION To prevent permanent damage, ensure the cable is disconnected from power before
connecting the mounting cradle.
5. Clean the area of the windshield where the suction cup will be placed.
6. Lift the suction cup lever, and press the suction cup to the windshield.
7. Push down the suction cup lever, to attach the cup firmly to the windshield.
8. Rotate the unit until the screen is comfortably visible.
mojoMINI_2_006
4