Leica Geosystems Leica mojoMINI 2 - User Manual - Manual (Page 23)

Leica mojoMINI 2, System Installation 23
2.5 Other Connections for the GeoSpective 2 Smart Antenna
The GeoSpective 2 smart antenna’s cable offers two other connections:
• NMEA output through the D9 port; and
• Ground speed radar simulation through the spade connectors.
If these outputs are required, make the appropriate connections.
The default NMEA configuration is:
•
Port - 9600 Baud, 8 Data Bits, Parity None, 1 Stop Bit
• Messages - GGA @ 5Hz, VTG @ 5Hz
The NovAtel Connect utility, available from www.novatel.com, can be used to
customize the NMEA output on the COM1 port.