Leica Geosystems Leica mojoMINI 2 - User Manual User Manual
Page 38
38
Leica mojoMINI 2, Field Navigation
3. The left-most button indicates whether the implement is offset to the left or the
right.
- implement is offset to the left
- implement is offset to the right
If your implement is centered behind the antenna, it does not matter which
offset button is active.
Tap the button to change it to the one that represents your configuration.
4. To enter the implement offset measurement, tap the up or down arrows on the
screen. The measurement is shown in both metric and US units: either may be
adjusted, and the other changes accordingly.
5. The middle button is for configuring whether the implement is locked, that is, it
does not swap to the other side of the vehicle when the vehicle turns around, or
whether it is not locked.
- implement is locked and does not swap to the other side of the vehicle
upon turning.
- implement is not locked and does swap to the other side of the vehicle
upon turning.
Tap the button to change it to the one that represents your configuration.