12 sbas – Leica Geosystems Leica mojoMINI 2 - User Manual User Manual

Page 61

Advertising
background image

Leica mojoMINI 2, Field Navigation

61

4.12

SBAS

Overview

Space Based Augmentation Systems (SBAS) can be configured for use by the
mojoMINI 2 as a correction source for position data, for regions that support SBAS.

Depending on the location where the system is being used, and also on the config-
uration of the mojoMINI 2, some users may experience different performance
depending on whether or not they are utilising SBAS (which include WAAS in North
America and EGNOS (European Geostationary Navigation Overlay Service) in Europe).

An SBAS configuration file can be used and modified to allow for future
changes in the satellites used by SBAS providers. Refer to the Leica
mojoMINI 2 Downloads page on www.virtualwrench.com for further infor-
mation.

Turning SBAS on
and off, step-by-
step

To turn SBAS on and off, carry out the following steps:

1. At the main navigation screen, tap the

settings icon

.

The Settings screen appears.

Advertising