2 geospective 2 smart antenna specifications, Geospective 2 smart antenna specifications – Leica Geosystems Leica mojoMINI 2 - User Manual User Manual
Page 84
Advertising
84
Leica mojoMINI 2, Technical Data
7.2
GeoSpective 2 Smart Antenna Specifications
Input-output
connectors
* When tracking GPS satellites.
Connector protec-
tion
Connector
Description
GeoSpective 2 COM/PWR
+8 to +36 V DC at 2.5 W (typical while logging)
*
Serial Com port
RS232 F compliant (Rx and Tx signals only)
Emulated radar output
High= supply voltage -0.5 V minimum
Low= 0.5 V minimum
Load= 3K Ohm minimum Default Radar Frequency Step
36.1 Hz/kph
Item
Protection Standard
Electrical conducted/coupled distur-
bance tolerance
ISO 7637:2002 (Survives all pulse types)
Advertising