Leica Geosystems Leica mojoMINI 2 - User Manual - Manual (Page 39)

Leica mojoMINI 2, Field Navigation 39
6. To return to the vehicle measurements screen and continue the implement
setup, tap the button.
7. For the implement width (3rd measurement
shown in the picture) and the distance from
the antenna to the implement (2nd measure-
ment shown in the picture), select the meas-
urement to change, and specify the value by
tapping the up or down arrows on the screen.
The measurements are shown in both metric
and US units: either may be adjusted, and the
other changes accordingly.
8. Tap on after setting each measurement.
When you are finished tap on while all
measurements are being displayed to continue
to the next screen.