Leica Geosystems TPS300 Basic Series - Manual (Page 11)

TPS300 Mining Manual-1.0.0en
Peg Survey
11
Backsight Point 1/3
PtID : 150
Hz : 98°12'45"
V : 99°45'23"
hr : -1.263 m
HD : ----.--- m
<EXIT> <SEARCH> <MEAS>
Proceeding Peg Survey, continued
Measure Foresight Point
PtID: -----
<OK>
> Step 7 Enter a desired
foresight point
number (PtID).
<OK> Saves the foresight
point number and
proceed to the
measure dialog.
Sample dialog:
> Step 5 Enter the reflector
height (hr) for the
backsight point, if
required.
The sign for the
reflector height (hr)
is normally negative.
> Step 6 Aim at backsight
point and measure.
<MEAS>, ALL or DIST/REC
Angle and distance
measurements are
triggered and stored
in the internal
memory.
<SEARCH>Allows users to
search and choose a
different backsight
point.
<EXIT> Terminates the
program and returns
to the start-up menu.
Sample dialog: