Leica Geosystems TPS300 Basic Series - Manual (Page 7)

TPS300 Mining Manual-1.0.0en
Peg Survey
7
Before starting Peg Survey
Data uploading using "Mining
Editor"
• Station coordinates
(East, North, Height,
Grade elevation)
• Backsight point coordinates
(East, North, Height,
Grade elevation)
• Tolerances, sequence,
number of sets
• Job definition
Uploading of fixpoint
coordinates, tolerances,
sequence and number
of sets is mandatory to
enable the operation of
"Peg Survey". To create new jobs on
board the instrument, a
set of tolerance must be
available.