Leica Geosystems TPS300 Basic Series - Manual (Page 9)

TPS300 Mining Manual-1.0.0en
Peg Survey
9
Error messages
Survey will be
executed according to
the following settings:
No of Sets: 3
Sequence: BFFB
<OK>
Number of sets:
One set means to measure two
times the backsight point and
two times the foresight point in
both faces.
The meaning of set is
described:
Mining_z02
One Set
The user must complete
the number of sets as
preset in the tolerance
setting.
FS BS
Two Sets
I Set
FS BS
I Set
II Set
Station or BS point has no
valid coords !
• The point number entered is
not available in the internal
memory or it has invalid
coordinates.
Re-enter point number
(
> Step 3 ).
Sample dialog: