When “1 lpcm 96k^48k” is selected, When “3 dts” is selected – Panasonic DVD-A320U User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Initial settings
3
Tilt the joystick (À, ▼) to select the setting
and press SELECT.
When “1 LPCM 96k^48k” is selected
1 No:
Digital audio of 48 kHz/16 bit is output during
playback of DVDs recorded in 48 kHz Linear
PCM. No digital audio is output during playback
of DVDs recorded in 96 kHz Linear PCM. How
ever, audio will be output using the original audio
recording system if the DVD has not been copy
right-protected. {Factory preset)
2 Yes: During playback of DVDs recorded in 48 kHz or
96 kHz Linear PCM, digital audio converted to
48 kHz/16 bit is output.
(Digital output of PCM audio is restricted to
48 kHz/16 bit or below for copyright protection.)
When “2 Dolby Digital” is selected
1 Bitstream*^ Dolby Digital (AC-3) bitstream (Ich-
S.lch) is output during playback of
DVDs recorded in Dolby Digital (AC-3).
(Factory preset)
Select this setting when the player is
connected to a Dolby Digital (AC-3) de
coder.
2 PCM:
Digital audio converted to 48 kHz/16 bit
PCM (2ch) is output during playback of
DVDs recorded in Dolby Digital (AC-3).
When “3 dts” is selected
1 PCM:
Digital audio converted to 48 kHz/16 bit
PCM (2ch) is output during playback of
DVDs recorded in dts. (Factory preset)
2 Bitstream^’:
dts bitstream is output during playback
of DVDs recorded in dts. Select this set
ting when the player is connected to a
dts decoder.
The screen illustrated in step 1 is displayed. Select "0" with the
joystick ( A , ▼) and press SELECT to return to the initial set
tings screen.
Also refer to “Common procedures” on page 30.
36