Panasonic DVD-A320U - Manual (Page 8)

Basic connection
•Ensure that this player and other equipment to be connected are set to the standby mode or off and disconnect the AC cord before
commencing connection.
•Do not block ventilation holes of any of the equipment and arrange them so that air can circulate freely.
•Read through the instructions before connecting other equipment.
•Ensure that you observe the color coding when connecting audio and video cables.
•Select the appropriate screen type at the initial setting “6 TV Aspect" according to your TV set [4:3/16:9 and Standard (Direct View
TVyCRT Projector/LCD Projector/Projection TV], (See page 35.)
Note
• Peripheral equipment and optional cables sold separately unless otherwise indicated.
• During DVD play, the TV volume may be at a lower level than during TV broadcasts, etc. If this is the case, adjust the volume to the
desired level.
Connect Your DVD/Video CD/CD Player
Directly To Your TV Set.
If the DVD/Video CD/CD player is connected to the TV
through a video cassette recorder, the picture may not
be played back correctly with some DVDs. So we
strongly recommend you do not connect the DVD/
Video CD/CD player to your video cassette recorder
when setting up your home entertainment system.
Do not place the
player on amplifiers or
other equipment
which may become
hot.
p
I---0 r)"C)-" o
XO ••••■“ 1 1 | o o o o o
8
The S (separate) video output connector separates the color (C) and luminance (Y) signals before
transmitting them to the TV set in order to achieve a sharper picture.
Use the S video cable when connecting the player to a TV set equipped with an S video input
connector for the best picture clarity possible.
* •
Note
• If your TV is monaural, use a stereo-monaura I audio cable instead of the supplied audio/video cable. The video part of the cable
(yellow) can still be used if required. Audio cable
_ _ __ I „ ^ To player audio output connector (white, “L”)
To TV audio input connector
To player audio output connector (red, “R”)