Setting the dialing method (tone or pulse) – Panasonic Panafax UF-130 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Dialing Method (Tone or Pulse)
Your machine can operate with either one of two dialing methods (Tone or Pulse),
depending on the type of telephone line you are connected to. Your machine is preset
at the factory for Pulse (Rotary) Dialing. If your machine requires Tone Dialing, set
to Tone Dialing using the following procedure.
1
Enter the Fax Parameter number.
07
[
2
]
2
07
[
2
]
1
To return the dialing method to Pulse
Dialing,
07
1 2 1 2
To store the new setting,
START
NOT€
To return to standby, press I STOP
The number on the left corner of the display indicates a Fax Parameter. The num
ber inside the brackets is the standard setting and the number blinking on the right
corner is the current setting.
17