Panasonic Panafax UF-130 - Manual (Page 46)

Redialing
If the number you dialed is busy or there is no answer, the machine will wait three
minutes and then automatically redial the number for you up to twice.
If no contact is made, the ALARM lamp will light up and the display will show an
information code (e.g., 630 which means no contact was made).
N.
I /
-c^^POWER
^ ON LINE
X !
ALARM
ID DISPLAY
630 AUTO ncv
/ I N
NORMAL LIGHT
ORIGINAL
CSZ)
r-i 1 L-,
STD FINE S-FINE
RESOLUTION
HALF TONE
cs
In this case, you can redial the last number by simply pressing PAUSE/REDIAL
The machine will redial the last number a total of three times.
You can use Redial if you dialed the last number using one of the following:
• One-Touch Dialing
• Direct dialing from the machine keypad (ON-Hook or OFF-Hook)
• Redialing
Even after you made contact and succeeded in sending your documents, you can
still use
I
PAUSE/REDIAL
I
to contact the same number again
NOT€ 1. You cannot use this Redialing feature when you used the telephone set connected
to your machine.
2, If you hear a voice speaking through the speaker, lift the handset and press {STOP
to talk with the other party (see page 47).
46