Halftone, R-l i l – Panasonic Panafax UF-130 User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Halftone
The Halftone setting is useful when you send photographs or illustrations with gray
tones. The Halftone function is preset to OFF in your machine.
1
The standard setting of Halftone is indicated by When It is turned on,
it will appear on the display.
cp^POWER
« ON LINE
M ALARM
ID DISPLAY
1 5 - 0 1 - 1 9 8 9 1 5 : 0 0
NORMAL
LIGHT
ORIGINAL
C^D
r-J 1
1—,
STD FINE S-FINE
RESOLUTION
------- 1
HALF TONE
D
-^O'^AUTO RCV
HALF TONE
To set Halftone to ON,
. lights up on the display.
X
I /
^a^POWER
« ON LINE
M ALARM
ID DISPLAY
1 5 - 0 1 - 1 9 8 9 1 5 : 0 0
- O AUTO HCV
^ 1 S
NORMAL
LIGHT
ORIGINAL
C^D
r-l I L-,
STD FINE S-FINE
RESOLUTION
HALF TONE
c
3
In this case, Resolution is automatically set to FINE, and Contrast is set to
NORMAL The settings are fixed during the communication.
To set Halftone to OFF, press I HALF TON^ again.
After choosing the appropriate halftone setting, proceed to the next trans
mission setting or begin dialing.
NOT€
When you use the Halftone function, it takes much longer to send a document since
more picture information must be sent to the other machine to make the finest copy.
37