1 i u – Panasonic Panafax UF-130 User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
When transmission ends, the display will show the number of pages sent.
POWER
/ I
”^=(bN LINE
ALARM
ID DISPLAY
05
NORMAL
LIGHT
ORIGINAL
C^D
STD FINE S-FINE
RESOLUTION
------- 1
HALF TONE
-O
AUTO RCV
If the line is busy, the machine will wait three minutes and then automatically
redial the same number up to twice with three-minute intervals.
^crjzTpOWER
•i*> ON LINE
■w ALARM
ID DISPLAY
555 1 2 3 4
NORMAL
LIGHT
ORIGINAL
( — 1 1 * — . * -
STD FINE S-RNE
RESOLUTION
HALF TONE
-O
AUTO RCV
If no contact is made, the ALARM lamp will light up and the display will show
an information code (e.g., 630 which means no contact was made).
's I
-c^^POWER
ON LINE
^ 1 ^
ALARM
ID DISPLAY
L-=_
630
-O
AUTO RCV
^ I
NORMAL LIGHT
ORIGINAL
CHD
,-1 I U
STD FINE S-FINE
RESOLUTION
HALF TONE
CZ=D
In this case, you can start another round of automatic dialing by pressing
PAUSE/REDIAL (see page 46).
NOT€
If you hear a voice speaking through the speaker, lift the handset and press ISTOP
to talk with the other party (see page 47).
45