Setting up your machine, User parameters, How to set the date and time – Panasonic Panafax UF-130 User Manual
Page 20: Blinking number indicates the entering point
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SETTING UP YOUR MACHINE
USER PARAMETERS
How to Set the Date and Time
The built-in timer helps you to know when you sent or received a document. It is
printed out on the head of each received page. In standby mode when the machine
Is in an idle state, it shows the current date and time on the display.
To set the date and time,
0 1 - 0 1 - 1 9 5 0 1 2 : 0 0
Enter the new day (two digits), month (two
digits), year (four digits), and 24-hour
clock (four digits).
If you make a mistake, move the cursor
to the incorrect number by pressing [3
or [>], then reenter the correct number
over it.
START
To set the date and time,
15 Jan., 1989 15:00
1
0
5
0
1 0 1 1 1 1 1 1 1 1 9 8 9 1 5
1 5 - 0 1 - 1 9 8 9 1 5 : 0 0
1 5 - 0 1 - 1 9 8 9 1 5 : 0 0
NOT€
Blinking number indicates the entering point.
20