Fax parameters, Changing fax parameter settings – Panasonic Panafax UF-130 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FAX PARAMETERS
Your machine has a variety of adjustable Fax Parameters which control the follow
ing functions. These Fax Parameters are preset for you in standard settings {see
Fax Parameter Table). Usually you do not need to change the settings. However,
you may wish to change some of them to suit your own circumstances. Once you
reset the standard position, it will be effective until you change it again. Some of
the settings, such as Resolution or Original (Contrast), can also be changed tem
porarily by pressing the particular key.
Changing Fax Parameter Settings
1
4
Enter a Fax Parameter number (always
two^its) from the Parameter table.
0 1
[1] 1
0 1 for Resolution.
The number inside the brackets is the
standard setting and the number blinking
on the right corner is the current setting.
Enter the new setting.
Ex:
01
M l 2
28