Panasonic WJ-MX30 - Manual (Page 21)

Narrow Border
with Matte Colour
• Press the REVERSE Button(19). The movement of the
wipe scene is reversed.
Wide Border
with Matte Colour
Faint border
without Matte Colour
Note :
In case of the picture-in-picture mode, 5 types
border is available by pressing the Edge Button
repeatedly as shown below.
once press a narrow border
second press wide border
third press faint border
fourth press shadow
(Shadow)
fifth press shadow with border
(Shadow with
border)
• Press both the ONE-WAY Button (18) and REVERSE
Button (19). The combination of these two functions
will allow for symmetrical screen wiping.
D-3. Luminance Key
• Move the Mix/Wipe Lever (58) all the way to the B-bus
position.
• Press the LUM KEY Button (53).
• Adjust the LEVEL Control (54) to the desired clear key
picture threshold.
Sixth press of this button eliminates the border
entirely.
3. Wipe Direction
• Press the ONE-WAY Button (18). The wipe scene moves
the same way each time the Mix/Wipe Lever (58) is
operated.
Note :
By adjusting the Mix/Wipe Lever (58) to the A-bus
position, a mixing effect can be obtained.
- 19 ■