A , t ) – Panasonic DVD-L50PM User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
See page 34 for steps 1 and 2.
3
Tilt/press
the
joystick/cursor
buttons
(A,
¥)
to
select
the
item and press SELECT.
DVD-L.5QyJi;i
©
©
pigltaî'Aüdfo Output
I " t;PCM96k^48k^:;
No
; 2 Dolby Digital
Bitstream
: 3 dts
Off
4 MPEG :
PCM
1 0 Exit
DVD-L50PM:
Audio Output; ■
. 1";'LPCM9^^48k ^
: 2 Dolby Digita! Bitstream
3 dts
Off
0 Exit
4
LPCM 96k->48k:
To select digital audio output dur
ing playback of DVDs recorded in
96 kHz Linear PCM. (In the case
of the DVD recorded in 48 kHz
Linear PCM, digital audio convert
ed to 48 kHz/16 bit Is output irre
spective of the setting.)
Dolby Digital:
To select digital audio output dur
ing playback of the DVD recorded
in Dolby Digital (AC-3),
dts:
To select digital audio output dur
ing playback of the DVD recorded
in dts.
DVD-L50A only:
4 MPEG:
To select digital audio output dur
ing playback of the DVD recorded
in MPEG audio.
Tilt/press the joystick/cursor
buttons
( A , T )
to seiect the
setting and press SELECT.
m^Nhen
“1 LPCM 96k-^48k” is se
lected
1 No (Factory preset):
«Digital audio of 48 kHz/16 bit
is output in case of 48 kHz
Linear PCM.
®No digital audio is output in
case of 96 kHz Linear PCM.
«Audio will be output using the
original audio recording sys
tem in case of DVDs not copy-
right-protected.
2 Yes:
During
playback
of
DVDs
recorded in 48 kHz or 96 kHz
Linear PCM, digital audio con
verted to 48 kHz/16 bit is out
put.
(Digital output of PCM audio is
restricted to 48 kHz/16 bit or
below for copyright protection.)
When “2 Dolby Digital” is se
lected
1 Bitstream (Factory preset):
Dolby Digita! (AC-3)' bitstream
(1ch-5.1ch) is output.
2 PCM:
Digital audio converted to 48
kHz/16 bit PCM (2ch) is output.
I When “3 dts” is selected
1 Off (Factory preset):
No digital audio is output.
2 Bitstream:
dts bitstream is output.
DVD-L50A only:
When MPEG” Is selected
1
PCM (Factory preset):
Digital audio converted to 48
kHz/16 bit PCM (2ch) is output.
Bitstream:
MPEG audio bitstream (Ich-
7.1ch) is output.
Setting is finished and the screen illustrat
ed in step 3 is displayed.
Note:
•See page 42 for the recommended set
ting of “6 Digital Audio Output”.