Others – Panasonic DVD-L50PM User Manual
Page 53
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
others
Symptom
Remedy
Reference
page
During playback of a
CD, the GUI screen
do not appear
automatically.
®lf play is stopped after the GUI screen have
been cleared from the screen, the GUI screen
will not appear automatically when play is re
sumed.
25
No On-Screen
Display.
•The “Off setting is selected for “1 On-Screen
Messages” in “4 On-Screen Messages”; select
“On”.
37
Shock-proof function
(for preventing jumps
in the sound during
CD play) fails to
work.
•Shock-proof function does not work when the
optical digital audio cable is connected to the
audio input/output (optical digital audio output)
connector of the player’s left-side pane!.
When an error or trouble is detected during operation, a service number appears on the
screen.
When a service number appears, check out the details given below.
C
I
Service number j Player status
A
Remedy
U11
•Disc is dirty.
A
•Wipe the disc clean. ^
r
HDQ
n □ stands
for a number.
V _______________
•Trouble is likely to have
occurred. The number fol
lowing “H” depends on the
status of the player.
• Press and hold STOP (□) to set^
the player to the standby mode
and then back to ON. Alternatively,
press and hold STOP (□) to set
the player to the standby mode,
disconnect the AC adaptor, and
then re-connect it.
_________________ _________________ /
'If the service number fails to clear even when the remedial action is taken, ask a service
technician to repair the player.
The following symptoms may be found during play or during charging
of the battery pack: these are normal.
•The player or AC adaptor heats up during use.
•When the battery pack is detached and then re-attached during charging, the
CHARGE (CHG) indicator goes off for an instant.
•Transmission noises are heard inside the AC adaptor during charging.
♦The battery pack heats up after charging or during use.