Geq in the memory, Operation: general, Range – Panasonic CQ-VX999EW User Manual
Page 10: Equalizer), Sound, And level seiting/geq (graphic
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION: GENERAL
(Continued)
Sound
Range
and Level Seiting/GEQ (Graphic
Equalizer)
0 Press SELECT to select GEQ mode.
0 Selecting a frequency
Press to switch the flashing cursor to change the sound range
as follows.
80^ 160-^ 320-> 640^ 1.6k^ 4k^ 10 k (Hz)
t____________________________________ i
: opposite direction)
(0
Adjusting the level
The level is 0 dB when the cursor is at the center. Any of the 13
levels can be selected from +12 dB to -12 dB.
(GEQ default: 0 dB for each frequency)
Press
A
to raise the level.
Press
V
to lower the level.
GEQ in the Memory
0 Press SELECT to select GEQ mode.
0 Select a frequency, adjust the level and set the GEQ.
(See steps
0
and
0
above.)
0
Press and hold one of the preset buttons 1 to 6 for more than 2
seconds until the display blinks.
Preset number
Note:
If a preset button once programmed in the memory is preset again, the GEQ saved in the memory is
erased.
10
CQ-VX999EW