Setting thru, Output – Panasonic CQ-VX999EW User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting THRU
Output
Connect an optionai power ampiifier (CY-M9054EIM, for example).
The volume of THRU output changes as a balance adjustment is made on the internal amplifier. Set
THRU output to operate with either the front or rear speakers according to the mounting position of
additionally installed speakers, (Default: FRONT)
Normal mode
LEVEL SELECT
(See Page 17)
F/R SELECT
Note:
® THRU output is stereo.
® No operation can be performed in Direct Memory mode or Navi Mute mode.
© When a setting mode is selected but no operation is made within 5 seconds, the display will return
to the normal mode. In such a case, press SUB»W again and repeat the setting procedure.
Adjusting the Volume of Additional
Speakers to Internal Amplifier/Switching
Interlock with Balance Adjustment
(X^ Press and hold SUB ® W for more than 2 seconds to select
PREOUT THRU.
@ Press SUB ® W to select F/R SELECT.
(X Press or to switch FRONT or REAR.
19
CQ-VX999EW