Remote control operation, Create a new profile, Adjusting the selected colour – Panasonic PT-AE1000 User Manual
Page 14: Colour, Tint, Brightness, Managing stored logs, Saving a log setting as a profile, User1, User2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Remote control operation
You
can
adjust a selected colour
individually
and
save
and retrieve under
the PICTURE MODE setting. Press the
COLOR MANAGEMENT button to open
the menu.
JCURSOR
3. Select a menu item and the ◄ ►
to adjust
each item level.
# The result box is displayed on the
right
of the
cursor and shows the adjusted colour.
1
.
LOG
PROFILE
SAVE
Create a new profile
Adjusting the selected colour
Select a colour and adjust COLOUR, TINT and
BRIGHTNESS.
Select the CURSOR menu and press
ENTER.
• The
projected image is captured,
and
the target
cursor is displayed.
COLOUR
TINT
BRIGHTNESS
4.
Adjust
the vividness of the colour.
Setting range; -30 to +30
Adjust the colour tone.
Setting range: -30 to +30
5.
tdjust the
brightness
of
the
colour.
¡Setting
range: -20 to +20
Press ENTER to store the adjusted result.
• “PROCESSING
” is displayed for a
few
seconds
and the result is stored in
LOG.
» You
can store
up
to 8 logs under LOG for each
PICTURE MODE
setting.
Press MENU or RETURN to return to the
previous menu.
• Repeat
the
steps above to store more
adjustment.
Move the cursor with A ▼
► to the
required place to select a colour and press
ENTER.
• The colour at the centre of
the
target cursor is
sampled and the sample box is displayed on
the
left of
the
cursor.
The
menu items are
displayed on the upper part of the screen.
Remote control operation
Managing
stored
logs
You can edit or delete
the
stored logs
of
the
selected PICTURE MODE,
Select LOG and press ENTER.
• The LOG menu
is displayed.
PICTURE MODE : CINEMA1
Sampled colour-
Adjusted colour
■ 8 or ALL
Select the required
log
from
1
DELETE, and press ENTER.
• Select
CHANGE
to
edit
the log.
The cursor menu is displayed and
you
can
readjust the colour.
•
Select DELETE
to
delete
the
log.
The
confirmation screen will be displayed.
Select
OK
to delete.
• When you select
ALL DELETE, the "DELETE
ALL LOG."
screen is displayed. Select
OK to
delete all logs. The
PROFILE
setting will be set
to
NORMAL,
Saving a log setting as a profile
Return to the
COLOUR MANAGEMENT
menu
and save the stored log as a profile. Make sure that
the
PICTURE MODE
is
not
switched.
Select the
PROFILE
SAVE
menu
and press
ENTER
• The PROFILE
SAVE
menu is displayed. You
can save the profile as
USER1, USER2
and
USER3.
i USER2
l
I USERS
______ I
Press ENTER to save the profile
• The confirmation screen is displayed.
Press
ENTER
again to save.
I Loading
saved profiles
When
profiles
are loaded
under
the
PICTURE
MODE setting,
you can keep them as you
defined
until the
PROFILE
is set
to NORMAL.
1. Select the required PICTURE MODE and
press ENTER.
2. Press the COLOR MANAGEMENT button
and select the PROFILE menu.
• The profile settings of
the
selected
PICTURE
MODE
will be
displayed.
3. Select the required profile and press ENTER.
NORMAL
USER1
USER2
USER3
Return to the default
setting of
the
PICTURE MODE
Defined profile settings.
NOTE;
• LOG
and
PROFILE
SAVE are not displayed
before
you
apply
COLOUR MANAGEMENT
• If you
load
a
profile with
a different attribute mode
of
the
profile, the
CURSOR
and
PROFILE SAVE
menus
will not be displayed.
» The approximate colours will be adjusted at the
same time. If you adjust
the
exact same colour
differently, both colours will affect each other
and
you might
get
unexpected
results.
• White, Black and
Grey
are not adjustable.
• If you escape the
COLOUR MANAGEMENT
menu
or attempt to perform another menu action
before you save the adjusted profile, the
confirmation screen will be
displayed,
• If you
switch
the input signal before you save the
profile,
the
setting will
be cancelled without
notice.
I
26
-
E
nglish
E
nglish
-
27