Panasonic PT-AE1000 - Manual (Page 16)

Menu Navigation
PICTURE Menu
I
(# LANGUAGE
Press A ▼ to select the required language and press ENTER.
1/2
DEUTSCH
FRANÇAIS
ESPAÑOL
ITALIANO
PORTUGUÉS
SVENSKA
NORSK
DANSK
2/2
POLSKI
C estina
MAGYAR
РУССКИЙ
1 уш
ENGLISH
OPTION
See “OPTION Menu” on page 38.
Sub-menu items Default setting Sub-menu items Default setting
INPUT GUIDE DETAILED INSTALLATION FRONT/DESK
OSD DESIGN TYPE1 SLEEP OFF
OSD POSITION CENTRE ALTITUDE LOW
BACK COLOUR BLUE LAMP POWER NORMAL
STARTUP LOGO ON LAMP RUNTIME
AUTO SEARCH ON FUNCTION BUTTON
HDMI SIGNAL LEVEL NORMAL
0Í % Ф
• See “Navigating through
the MENU” on page 28.
RETURN
a
Depending on the projection environment, you can use
these preset parameter settings to optimise image
NORMAL
Setting for a general image, such as
sports or games
dynamic Bright and sharp setting
^INEMAI Hollywood style colours
CINEMA2 Deeper and more rich colour setting
CINEMA3 Vivid and crisp colour setting
VIDEO
Setting for active images, such as
music or concert
natural
Reproduces the original colour of the
image
NOTE:
• It may take for a while until the selected mode is
stabilised.
You can adjust the contrast of the projected image.
Adjust the BRIGHTNESS in advance if necessary.
Lower Higher
• Setting range; -64 to +64
You can adjust the brightness of the projected image.
Darker Brighter
• Setting range: -32 to +32
image
For reproducing the original colour of S-VIDEO
images precisely, set as follows.
1 . Press PICTURE ADJUSTMENT and select
NATURAL.
2. Press DEFAULT to reset the other Sub-menu
menu items
3. Press RETURN once to return to the Main menu
and select OPTION
4. Switch the LAMP POWER to NORMAL
You can adjust the colour saturation of the projected
image.
Lighter Darker
• Setting range; -32 to +32
• When
PC is connected, this function is available with
1 125 {1 080)/60i, 1 125 (1 080)/50i,
1 125 (1 080)/60p and 1 125 (1 080)/50p signals
only.
You can adjust the skin tone in the projected image.
More
greenish
More
reddish
• Setting range; -32 to +32
• When
PC is connected, this function is available with
1 125(1 080)/60i, 1 125(1 080)/50i,
1 125 (1
080)/60p and 1 125 (1 080)/50p signals
only.
30
-
E nglish
E nglish - 31