Campbell Hausfeld PS120B - Manual (Page 16)

16
Operating Instructions and Assembly Instructions
Airless Paint Sprayers
www.chpower.com
maintenance Chart
maintenance
Item
Check
replace User
Serviceable
Detail Notes
Product safety labels Before each use As required Yes Call for location of product safety labels
and related part numbers.
Trigger adjustment Before each use Yes See trigger lock warning under Spray
Gun Maintenance.
Airless hose Before each use Yes Read information on the hang tag
attached to the high pressure hose for
instructions on maintenance.
Sealing surfaces Before each use Yes Make sure they are clean.
Suction tube Before each use As required Yes Check for nicks and cuts.
Bypass tube Before each use As required Yes Check for nicks and cuts.
Suction filter Before each use and
every 5 gal.
As required Yes
Gun filter Before each use Every 25 gal. Yes Do not attempt to clean gun filter, only
replace.
Roller nap Before each use and
every 5 gal.
As required Yes
Pressure switch and
prime/spray valve
Does not
require
replacement
with normal
use
* Call
Inlet valve Before each use Yes 7/8” Wrench, torque to 150 in/lbs.
Outlet valve Before each use Yes 5/8” Wrench torque to 150 in./lbs.
Spray tip Before each use Every 20-75
gal.
Yes 1” Wrench torque to 135 in/lbs.
* Call 1-800-626-4401