Yamaha RX-V663 - Manual (Page 63)

XM Satellite Radio tuning
Before performing the following operations, press
(3)XM.
All Channel Search mode
1
Press ©SEARCH MODE (or @SRCH
MODE) repeatedly to select “ALL CH
SEARCH”.
2
Press ©PRESET/TUNING/CH <l / O (or
® PRESET/CH
A / V)
repeatedly to search
for a channel within all channels.
■ Preset Search mode
Prior to selecting a preset channel in the Preset Search
mode, you must preset XM Satellite Radio channels. For
details, see “Setting the XM Satellite Radio preset
channels” on page 60.
\i/
2(f>l
The initial factory setting of all preset channels (A1 to E8) is “001
Preview”.
1
Press ©SEARCH MODE (or (^SRCH
MODE) repeatedly to select “PRESET
SEARCH”.
• You can search for a channel quickly by pressing and holding
©PRESET/TUNING/CH
<l /1> (or
©PRESET/CH
A / V).
• To display the XM Radio ID number displayed in the front
panel display, select channel “0”.
■ Category Search mode
1 Press ©SEARCH MODE (or igiSRCH
MODE) repeatedly to select “CAT SEARCH”.
2
Press ©CATEGORY (or
®
A-E/CAT. <1
/
1>)
repeatedly to change the channel category.
3
Press ©PRESET/TUNING/CH
<1 / [>
(or
©PRESET/CH
A / V)
repeatedly to search
for a channel within the selected channel
category.
You can search for a channel quickly by pressing and holding
©PRESET/TUNING/CH
<1 /1> (or
©PRESET/CH
A / V)
2
Press ©CATEGORY (or ©A-E/CAT. <1 /1>)
repeatedly to change the preset channel
group (A to E).
3
Press ©PRESET/TUNING/CH <1 /1> (or
©PRESET/CH
A / V)
repeatedly to change
the preset channel number (1 to 8).
You can also select the preset channel number directly by
pressing the numeric buttons (1 to 8) (®).
■ Direct number access mode
Press i^SRCH MODE on the remote control
repeatedly to select “ALL CH SEARCH” or
“CAT SEARCH”.
Press the numeric buttons (@) to enter the
desired three-digit channel number.
For example, to enter the number 123, press the
numeric buttons (®) as shown below.
• To enter a one-digit or two-digit channel number, press the
numeric buttons (®) on the remote control and then press
®ENT
to confirm the input number.
• Instead of pressing ®
ENT
to tune into the channel
immediately, you can wait a few seconds until this unit confirms
the entered channel number.
• Pressing a button other than the numeric buttons (®) or @
ENT
cancels the Direct Number Access mode procedure.
59
En