Natb, Not0, Tuning into the locked channels – Yamaha RX-V663 User Manual

Page 70: The following menu screen appears, New pin:0000” appears, A / v, Check mark appears before the locked channel

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SIRIUS Satellite Radio™ tuning

Press

(DA

/

V

repeatedly to select “SIRIUS”

and then press (D ENTER.

The following menu screen appears.

Й) 5IRIU5

INPUT RENfiME

UOL. TRIM.... 0.0dB

PfiRENTfiL LOCK

[■*.]/[▼] : IJp/Down

CENTER]¡Enter

Press

(DV

repeatedly to select “PARENTAL

LOCK” and then press ©ENTER.

“NEW PIN:0000” appears.

PflRENTftL LOCK

NEW PIN:0000

[0]^C9]:NUMBER

CENT]¡Enter

NatB

If a SiriusConnect tuner is not connected to this unit, “Not

Available” appears.

If the Parental Lock code number is already set, “PIN:___________”

appears instead of “NEW PINiOOOO”. Refer to step 8 and

then proceed the operations.

6

Enter the desired 4-digit code number by
using the numeric buttons (®).

\ 1/

Press

©RETURN

to return the previous menu level

without setting the code number.

7

Press ©ENTER to confirm the code number.

“OK” and then the SIRIUS Satellite Radio channel

list appears. Refer to the step 9 and then proceed the

operations.

8

Enter the 4-digit code number you set at step

6 above to unlock the protection.

When the code number is correct, “OK” and then the

SIRIUS Satellite Radio channel list appears.

9

Press ©o / D> repeatedly to select the
desired channel category and then press

©A / V

repeatedly to select the channel you

want to lock.

Not0

In the SIRIUS Satellite Radio channel list screen, this unit

outputs the sound of the selected channel even if the channel

is locked. Only the first eight characters of each channel

name are displayed in the list.

10

Press

©ENTER

to lock the selected

channel.

Check mark appears before the locked channel.

\ I /

When you select the locked channel and press

©ENTER,

this unit unlocks the selected channel.

11 Repeat steps 9 and 10 to lock the channels

you want.

12

Press

©RETURN

to exit from the

“PARENTAL LOCK” screen.

13

Press

@MENU

to exit from the setup menu.

This unit is tuned into the last channel you select in

the “PARENTAL LOCK” screen. If the channel is

locked, this unit is tuned into “184 SIRIUS Weather

& Emergency” or “000 Sirius IDxxxxxxxxxxxx”

(“xxxxxxxxxxxx” indicates the Sirius ID of your

SiriusConnect tuner).

• If you forget or want to change the Parental lock code number,

use “SR PIN” in “ADVANCED SETUP” to reset the Parental

Lock code number.

• When you select “ALL” in “INIT” (see page 109), all locked

channels are unlocked.

■ Tuning into the locked channels

You can tune into the locked channels by the Direct

number access mode or preset tuning mode. When you

tune into the locked channel, following message appears

in the front panel display. Enter the code number you set

for the Parental Lock feature by using the numeric buttons

(®) or press ®

ENT

to cancel the tuning.

P IN:,

If the entered code number is incorrect, “Wrong” appears in the

front panel display and this unit is tuned into the previously

selected channel.

If a channel is unlocked, you can also select the channel in

Zone2.

66

En

Advertising