Panasonic PVQ-M2508 - Manual (Page 16)

Record On a Tape
|\X Check list before you begin.
r~l All connections are made (see page 5).
Q Your Combination VCR is plugged in.
/
AM
TIMER Indicator
g PROGRAM A RECORD
^ Indicator
4
3
Selecting the Input Mode
You can select the Input Mode in either of the
following ways.
■ Press CH AT . The display will change in
the order below.
C —► 1 — 2 — 3------------- V
(CABLE) (CABLE) (TV) J
■ a Press ACTION to display the MAIN MENU,
b Press AV ◄ ► t o select ‘TV," and then
press ACTION to display the SET UP TV
screen.
c Press АГ to select “INPUT SELECT,”
and then press ► repeatedly to select
■TUNER” or “LINE."
1
Insert a cassette with record tab.
The Combination VCR power
comes on automatically.
2
Press CH AT, or
NUMBERED keys on the
remote control to select a
channel.
• Or, press CH AT on the
Combination VCR.
CH 08
ABC
To record from an outside
source, press CH at to select
LINE input (see bottom of this page).
Press SPEED repeatedly
until the desired tape
speed is displayed (see
page 25).
SP = Standard Play
LP = Long Play
SLP = Super Long Play
REC Press REC/TIME on the
remote control to start
recording.
• Or, press REC/TIME on the
Combination VCR.
• To edit out unwanted portions,
press PAUSE to pause the
recording in progress. To release, press PAUSE again.
• You can not view another channel during recording.
TO SET SPECIFIC REC TIME
PLEASE PUSH REC KEY
One Touch Timer Recording (OTR)
The Combination VCR stops recording at a preset time.
In step 4, press REC/TIME repeatedly to set the
length of the recording. Each press will change the
time as shown.
( ►Normal Ree—►0:30—►liOO
4:00^3:00-4—2:00
► 1:00-Nv
1:30-4-^
The PROGRAM TIMER indicator lights on the front panel.
5
Press STOP on the remote control to stop
recording.
• Or, press STOP/EJECT on the Combination VCR.
While it is possible to change the tape
speed when you are recording, there will
be some distortion on the tape where the
change occurred.
The remaining recording time of an OTR
can be displayed by pressing DISPLAY,
After the Combination VCR has been in
Rec Pause mode for 5 minutes, it will
stop automatically to protect the tape and
video head.
16